Inspection of all medical gas components, in accordance with NFPA99, including master alarms, area alarms, zone valves, station inlets/outlets, source equipment, with contamination, particulate, and dew point evaluation and analysis. Includes documentation of findings and inventory of systems.
Verify installation in accordance with NFPA99 requirements. Includes documentation of findings and inventory of what is tested.
Testing of all booms and hoses on those booms for leaks. Standing pressure test on all zone valves with booms, and leak detection device used to detect leaks. Internal inspection of booms/columns if necessary. Includes documentation of findings and inventory of what is tested.
Testing Audible and Visual signals on area and master alarms for proper function on a monthly basis. Includes pressure/vacuum readings and inventory documentation.
Evaluation of each Medical Air source for dew point, contamination, and particulate testing in accordance with NFPA99. This includes testing at each source and at least one location within hospital outlet each source serves. Includes documentation of findings and inventory of what is tested. CO Monitor Calibration included upon request.
Testing of all area alarms and sensors of area alarms to determine set points are accurate and high pressure alarms activate at area alarm. Also proper function of all alarms and determining if sensors are on demand check fittings. Includes documentation of findings and inventory of what is tested.
Testing the EOSC and ensuring proper function and the ability to take over the system through the EOSC.
Pipe Trace on AUTO0CAD converted to PDF on 11"x17" or 24"x36" - per gas, per floor with .DWG files for updating future changes.
Distribution and Control Diagram on AUTO-CAD and converted to PDF. Includes placard labeling for each zone. Control diagram shows what each zone serves and what each alarm controls. Also documents inventory of each gas/vacuum/wagd in each room.
Experienced technicians repairing and replacing deficient or recommended medical gas systems.
Provide system back feed assistance during shutdown and provide verification after completion. This will include documentation. Hospital to provide back feed source / tanks. We can provide portable suction and gas upon request.
Medical Vacuum, Medical Air, Instrument Air Startup Services.
Provide quality, credentialed, and experienced contractors to install equipment, piping, or other contract work.
4 Hour Maintenance Specific Training Course Per NFPA 99.
Provide expertise assistance for anything medical gas related.
Provide review of current or future medical gas plans for upcoming projects to ensure code adherence and cost effective solutions
15 minutes nitrous oxide STEL and TWA per NIOSH recommended standards for waste anesthesia gases and vapors.
Testing of positive and negative pressure with relation to adjacent areas and air exchange rate.
PEL/STEL permissible and short term exposure limit testing of: Methyl Alcohol, Ethyl Alcohol, Acetic Acid, Formaldehyde
Nitrous Oxide and Halogenated Agent Badge Testing analyzed by outside credentialed labs.
Ask for any additional services not listed.
Copyright © 2024 Priority Medical Gas - All Rights Reserved.
Powered by GoDaddy
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.